Skip header
 

Interpreting the Configuration Page

This section describes the configuration page.

System Reference

  • Machine ID

    Displays the serial number assigned to the board by its manufacturer.

  • Total Memory

    Displays the total amount of memory (SDRAM) installed on the machine.

  • Total Counter

    Displays the total number of pages printed by the machine to date.

  • Firmware Version

    • Printer

      Displays the version number of the machine firmware.

    • System

      Displays the version number of the system firmware.

    • Engine

      Displays the version number of the machine engine.

    • LCDC

      Displays the version number of the control panel.

    • NIB

      Displays the version number of the network interface.

  • Device Connection

    Displays the installed device options.

  • HDD: Font/Macro Download

    Displays the capacity of the hard disk drive.

  • Printer Language

    Displays the version number of the printer language.

  • Attached Equipment

    Displays the installed optional equipments.

  • Consumption Status

    Displays the supply status.

Paper Input

Displays settings made under the [Tray Paper Settings] tab.

Data Management

Displays settings made under the [Data Management] tab.

System

Displays settings made under the [System] tab.

PCL Menu

Displays settings made under the [PCL Menu] tab.

PS Menu

Displays settings made under the [PS Menu] tab.

PDF Menu

Displays settings made under the [PDF Menu] tab.

XPS Menu

Displays settings made under the [XPS Menu] tab.

Host Interface

Displays settings made under the [Host Interface] tab.

When DHCP is active on the network, the actual IPv4 address, subnet mask and gateway address appear in parentheses on the configuration page.

Interface Information

Displays the interface information.

Virtual Printer

Displays whether the virtual printer is active or inactive.