Skip header
 

Printing of Documents Stored When Print Configuration Errors Occur

If the document has been stored by [Store and Skip Errored Job] in the [System] tab under [Printer Features], print the document using the control panel.

For details about [Store and Skip Errored Job], see Storing Jobs with Errors Automatically.

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Press the [Printer (Classic)] icon.

3Press the [Print Jobs] tab.

4Select the job type to print.

Operation panel screen illustration

5Select the files you want to print.

You can simultaneously select all files of the same type by pressing [Select All Jobs] after selecting a file.

6If necessary, press [Preview] to check the print image of the document.

If you set the password in the printer driver, enter the password.

Only the first page of the document is displayed in the preview screen. No previews can be displayed when more than one document is selected.

Press [Exit] to close the preview screen.

7Press [Print].

If you set the password in the printer driver, enter the password.

If multiple print files are selected, and some of these require a password, the machine prints files that correspond to the entered password and files that do not require a password. The number of files to be printed is displayed on the confirmation screen.

8Enter the number of copies using the number keys if necessary, and then press [Print].

Note

  • If you change the number of copies when multiple documents are selected, the newly specified number of copies will be printed for all of the selected documents. If you do not change the number, the number of copies specified when the documents were stored will be printed for each document.

  • To stop printing after printing has started, press [Job Reset] or [Stop] on the [Printer] screen.

  • You can also print a file from Web Image Monitor. For details, see Web Image Monitor Help.