Skip header
 

Print Area

The following shows the recommended print area for this machine.

Illustration of print area for paper numbered callout illustration

  1. Print area

  2. Feed direction

  3. Total length of Right edge and Left edge: Approx. 6.0 mm (0.24 inches)

  4. Total length of Right edge and Left edge: Approx. 6.0 mm (0.24 inches)

  5. Total length of Leading edge and Trailing edge: Approx. 4.0 mm (0.16 inches)

  6. Total length of Leading edge and Trailing edge: Approx. 4.0 mm (0.16 inches)

Note

  • The print area may vary depending on the paper size, printer language, and printer driver settings.

  • Depending on the printer driver settings, you may be able to print outside the recommended print area. However, the actual output may not come out as desired, or a paper feed problem may occur.

  • Because the Edge to Edge Print function is not supported, this setting is disabled even if Edge to Edge Print is specified.

PreviousNext