Skip header
 

Loading Paper into Tray 1

Important

  • When paper loaded in the right side of tray 1 runs out, paper on the left is automatically shifted to the right. Do not pull out tray 1 while the tray is moving paper; wait until sounds stop coming from the tray.

  • For the right stack, align the right edge of the paper with the right edge of the tray. For the left stack, align the left edge of the paper to the left edge of the tray.

  • Region A icon(mainly Europe and Asia)
    Tray 1 can hold A4Portrait paper only. If you want to print on 81/2 × 11Portrait from tray 1, contact your service representative.

  • Region B icon(mainly North America)
    Tray 1 can hold 81/2 × 11Portrait paper only. If you want to print on A4Portrait from tray 1, contact your service representative.

1Carefully pull out tray 1 until it stops.

Tray 1 illustration

2Square the paper and load it print side down.

Do not stack paper over the limit mark.

  • Whole tray pulled out

    Tray 1 illustration

  • Left half of the tray pulled out

    Tray 1 illustration

3Carefully push the paper tray fully in.

Note

  • You can load paper even if tray 1 is in use. It is okay to pull out the left half of the tray while tray 1 is in use.