Skip header
 

Guide to Functions of the Machine's External Options

Illustration of external options numbered callout illustration

  1. Finisher SR4120

    Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

  2. Interposer (Finisher SR4120, Booklet Finisher SR4130)

    Inserts cover or slip sheets into copied or printed paper.

  3. Multi-Folding unit

    The Multi-Folding unit can apply the following folds: Half Fold, Letter Fold-out, Letter Fold-in, Double Parallel Fold, Gate Fold, and Z-fold.

    To use the Multi-Folding Unit, the Finisher SR4120, the Booklet Finisher SR4130 or the Finisher SR4080 is required.

  4. Extension unit

    Attached to the LCT and holds 2,500 sheets of B4 JISLandscape, A4Landscape, 81/2 × 14Landscape, or 81/2 × 11Landscape paper.

  5. Large capacity tray (LCT)

    Paper is loaded here.

  6. Copy connector

    Allows you to use the connect copy function.

  7. A3/11 × 17 tray unit

    You can load paper sizes up to A3Landscape or 11 × 17Landscape in Tray 1 using this unit. If you install the A3/11 × 17 tray unit on your machine, you cannot use it as a tandem tray.

  8. Copy tray

    If you select this as the output tray, copied/printed paper and fax messages are delivered here face down.

  9. Interposer (Finisher SR4080)

    Inserts cover or slip sheets into copied or printed paper.

  10. Finisher SR4080

    Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

  11. Output jogger (Finisher SR4080)

    Jogs the sheets delivered to the finisher shift tray.

  12. Booklet Finisher SR4130

    Sorts, stacks, staples, and punches multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

    • Finisher booklet tray

  13. Output jogger (Finisher SR4120, Booklet Finisher SR4130)

    Jogs the sheets delivered to the finisher shift tray.

  14. Mailbox

    Sorts printed paper. Consists of Mailbox output trays 1 - 9.

Note

  • You cannot install multiple finishers simultaneously.