Skip header
 

Procedure for Copying from the Bypass Tray (Classic)

1Load the paper face up in the bypass tray.

The bypass tray () is automatically selected.

2Press [Sharp].

3Press [Paper Size].

4Specify the size of the paper, and then press [OK].

5Press [Paper Type].

6Specify the type of the paper as necessary, and then press [OK] twice.

7Place the originals, and then press [Start].

8When the copy job is finished, press [Reset] to clear the settings.

Note

  • If the bypass tray is not automatically selected, press [Bypass].

  • When copying onto special paper such as adhesive labels, always select [Face Up] under [Copy Eject Face Method in Bypass Mode] of User Tools. If you select [Face Down], a paper misfeed may occur. For details, see Input / Output.

  • If you place originals on the exposure glass and want the copies to be delivered face down, select [Face Down] for both [Copy Eject Face Method in Glass Mode] and [Copy Eject Face Method in Bypass Mode] of User Tools. For details, see Input / Output.