Skip header
 

Exporting Device Information

When exporting device information, the data is saved on an SD card.

Press the [Menu] key, and then select setting items using the [Down arrow key] or [Up arrow key] key.

1Make sure the printer is turned off.

2Insert the SD card in the SD card slot.

For details about inserting the SD card and the slot location, see "Installing SD Card Options" Operating Instructions.

3Turn the printer on.

4Log in from the control panel as an administrator with all privileges.

5Select [Device Setting Information] Press [OK]

6Select [DevSettgInfo: Exp (MemDev)] Press [OK]

7Select [Device Unique Information] Press [OK]

8Select [Include] or [Exclude] Press [OK]

9Select [Enter Encryption Key] Press [OK]

10Select [Yes] Press [OK]

11Select [Enter] Enter an encryption key. Select [Accept]

12Select [Enter] Re-enter the encryption key. Select [Accept]

13Select [Export] [Export]

14When the confirmation screen appears, select [Yes].

15Make sure the message regarding that the exporting process being successfully completed appears. Select [Exit]

16Turn the printer off, and then remove the SD card on which the exported settings are stored.