Top Page > Operating Instructions > Configuring and Managing the Printer > Printer Configuration Items List > Security Options

Security Options

Previous Next

The table below shows the list of setting items. For details about their functions, see Security Options.

Extended Security	Driver Encryption Key
Extended Security	Encrypt Address Book	On, Off (default)
Extended Security	Restrict User Info.Display	On, Off (default)
Extended Security	Enhance File Protection	On, Off (default)
Extended Security	Settings by SNMPv1 and v2	Prohibit, Do not Prohibit (default)
Extended Security	Drvr Encrp Key:Encrp Strng	Simple Encryption (default), DES, AES
Extended Security	Authenticate Current Job	Login Privilege, Access Privilege, Off (default)
Extended Security	Password Policy	Complexity Setting Level 1, Level 2, Off (default) Minimum Character No. 0 (default) to 32
Extended Security	@Remote Service	Prohibit, Do not Prohibit (default)
Extended Security	Update Firmware	Prohibit, Do not Prohibit (default)
Extended Security	Change Firmware Structure	Prohibit, Do not Prohibit (default)
Extended Security	Password Entry Violation	Max. Allowed No. of Access 0 to 100 Default: 30 Measurement Time 1 to 10 Default: 5
Extended Security	Securty Setg for Accs Viol	Security Setting On/Off On Off (default)
Extended Security	Device Access Violation	Max. Allowed No. of Access 0 to 500 Default: 100
Extended Security	Device Access Violation	Measurement Time 10 to 30 Default: 10
Extended Security	Device Access Violation	Authentication Delay Time 0 to 9 Default: 3
Extended Security	Device Access Violation	Simultns Access Host Limit 50 to 200 Default: 200
Service Mode Lock	On, Off (default)
Firmware Version	System, Web Support, NetworkDocBox, PDF, PCL, XPS, Network Support, Font EXP, PS3 Font, PCL Font, PS3, RPCS, Printer, Data Erase Onb, Power Saving Sys, Engine, Ic Ctlr, Ic Key
Network Security Level	Level 0 (default), Level 1, Level 2, FIPS 140, Custom
Auto Erase Memory Setting	On	HDDErase NSA, DoD, Random Numbers, Number of Erase: Between 1 to 9 (default: 3 times)
Auto Erase Memory Setting	Off (default)
Erase All Memory	NSA
Erase All Memory	DoD
Erase All Memory	Random Numbers	Number of Erase: Between 1 to 9 (default: 3 times)
Extend Auth.Mng.
Transfer Log Setting	On, Off (default)
Machine Data Encryption	Encrypt	Format All Data, CarryOver FileSys DataOnly, Carry Over All Data (default)
Collect Logs	Job Log	Active, Inactive (default)
Collect Logs	Access Log	Active, Inactive (default)
Collect Logs	Eco-friendly Logs	Active, Inactive (default)

For details, see Security Guide.