The table below shows the list of setting items. For details about their functions, see IPDS Menu.
Tray Form |
Tray 1 |
XXX *1 |
Tray Form |
Tray 2 |
XXX *1 |
Tray Form |
Tray 3 |
XXX *1 |
Tray Form |
Tray 4 |
XXX *1 |
Tray Form |
Tray 5 |
XXX *1 |
Tray Form |
Bypass Tray |
XXX *1 |
Emulation Mode |
Native (default), 4028 |
|
Print Mode |
Standard, Enhanced (default) |
|
Default Code Page |
37 (default), 38, 260, 273, 274, 276, 277, 278, 280, 281, 284, 285, 286, 287, 288, 290, 297, 420, 423, 424, 500, 870, 871, 875, 880, 892, 893, 905, 1025, 1026, 1140, 1141, 1142, 1143, 1144, 1145, 1146, 1147, 1148, 1149 |
|
Default FGID |
3, 11, 12, 18, 19, 46, 85, 86, 92, 111, 112, 159, 164, 203, 221, 223, 254, 256, 281, 283, 290, 304, 305, 306, 318, 319, 400, 404, 416 (default), 420, 424, 428, 432, 2304, 2305, 2306, 2307, 2308, 2309, 2310, 2311, 5687, 5707, 5815, 5835, 20224 |
|
Characters Per Inch |
5.0 to 30.0 (in 0.1 increments) Default: 10.0 |
|
Valid Printable Area Check |
On (default), Off |
|
Edge to Edge |
- *2 |
|
Font Substitution |
On, Off (default) |
|
Resource Capture |
On (default), Off |
|
Resolution |
Auto (default), 240dpi, 300dpi, 600dpi |
|
Graphic Character String |
Auto (default), Character Scale, Font Activation |
|
Bar Code |
Legacy, Fidelity (default) |
|
Box Draw |
On, Off (default) |
|
Tray Mapping |
Tray 1 Mapping |
Auto (default), IPDS Tray |
Tray Mapping |
Tray 2 Mapping |
Auto (default), IPDS Tray |
Tray Mapping |
Tray 3 Mapping |
Auto (default), IPDS Tray |
Tray Mapping |
Tray 4 Mapping |
Auto (default), IPDS Tray |
Tray Mapping |
Tray 5 Mapping |
Auto (default), IPDS Tray |
Tray Mapping |
Bypass Tray Mapping |
Auto (default), IPDS Tray |
*1 You can specify a name consisting of 16 single-byte characters at the maximum as the form name.
*2 This setting is not available on this machine.