Previous
Check the contents of the package.
Turn the machine off and unplug the power cord.
Fully insert the interface unit.
Check that the interface unit is firmly connected to the controller board.
Plug in the power cord, and then turn on the machine.
Print the configuration page to confirm that the board was attached correctly.
Check that the board was correctly installed by printing the configuration page. If it is correctly installed, "Bluetooth" will appear for "Device Connection" on the configuration page. For details about printing the configuration page, see "List / Test Print", Print.
If the board was not installed properly, repeat the procedure from the beginning. If it cannot be installed correctly even after trying the installation a second time, contact your sales or service representative.
