Skip header
 

Unpacking

To protect it from shock and vibration during transit, this machine comes packaged in cushioning foam and secured with tape. Remove the protective materials after placing the machine in the location where it will be installed.

WARNING

  • The following explains the warning messages on the plastic bag used in this product's packaging.

    • Keep the polythene materials (bags, etc.) supplied with this machine away from babies and small children at all times. Suffocation can result if polythene materials are brought into contact with the mouth or nose.

CAUTION

  • The machine weighs approximately 28 kg (62 lb.).

  • When moving the machine, use the inset grips on both sides, and lift slowly in pairs. The machine will break or cause injury if dropped.

Important

  • The removed tape is sticky. Be careful not to let the sticky side touch your skin or clothes.

  • Do not grip the tray area when lifting the machine.

  • Make sure that paper clips, staples, or other small metallic objects do not fall inside the machine.

1Remove the plastic bag.

2Take the power cord and waste toner bottle out of the box in which the machine was packed.

3Lift the machine using the inset grips on both sides of the machine.

Lower the machine slowly and carefully to prevent getting your hands stuck.

When moving the machine, do not touch the following parts:

  • The operation panel, the ADF, and parts around them

  • Convex parts on the right side of the machine

  • Places indicated on the labels attached to the machine

  • The bottom of the optional paper tray

4Remove the adhesive tape attached on the machine's exterior.

When you have finished unpacking, do the following:

  • If you want to use the machine with optional accessories installed, see Installing Options.

  • If you want to use the machine without optional accessories installed, see Loading Paper.

For details about settings up the machine, see Machine Set Up Procedure.

PreviousNext