Previous
Load the paper face up in the bypass tray.
The bypass tray (
) is automatically selected.
Press [
].
Press [Paper Size].
Specify the size of the paper, and then press [OK].
Press [Paper Type].
Specify the type of the paper as necessary, and then press [OK] twice.
Place the originals, and then press [Start].
When the copy job is finished, press [Reset] to clear the settings.
If you specify [Display Automatically] for [Paper Settings Screen for Bypass], you can display the [Bypass Tray Paper] screen by pressing [
] instead of pressing []. For details, see General Features.If the bypass tray is not automatically selected, press [
].
