You can switch the three screens described in this section by flicking the screen up or down.
No. |
Icon |
Description |
---|---|---|
1 |
You can switch to immediate transmission mode. Unless immediate transmission is selected, memory transmission mode is selected by default. |
|
2 |
You can select an original type that is suitable for your originals. |
|
3 |
Press to select the resolution according to the size of the text on your original. |
|
4 |
Press to specify the density to scan the original. You can also specify the density by touching the icon and dragging it right or left. |
|
5 |
Press to select the scanning size of the original. |
|
6 |
Press to select the sides of the original. |
No. |
Icon |
Description |
---|---|---|
7 |
Press to select the orientation of the original. |
|
8 |
Press to specify the sender. |
|
9 |
Press to specify settings for stamps. |
|
10 |
Specify the Internet Fax/E-Mail subject. |
|
11 |
Specify the Internet Fax/E-Mail Text. |
No. |
Icon |
Description |
---|---|---|
12 |
Page Separation and Length Reduction. |
|
13 |
You can specify settings to automatically send files directly or via F-code confidential communication at a specified time. |
|
14 |
You can select a standard message to be printed. |
|
15 |
You can send files over a closed network. |
|
16 |
Once memory transmission is complete, you can have the result printed. |
|
17 |
Requesting Reception Confirmation. |
|
18 |
Specifying Internet Fax/E-Mail Destinations as BCC Addresses. |
|
19 |
You can receive a transmission notification by e-mail. |