Skip header
 

Stamp Text

This section describes the user tools in the Stamp Text menu under [Stamp].

Font

You can select the font in Stamp Text mode.

Default: [Font 1]

Size

You can select the stamp text size.

Default: [Auto]

Superimpose

You can have the stamp text printed in white when it overlaps black parts of the image.

Default: [Off]

Stamp Color

Select the priority color when printing the text.

Default: [Black]

Stamp Setting

Specify how stamp text is printed.

  • Stamp Position

    Specify where to print the Stamp Text. For details about the stamp position, see Stamps.

    Default: [Top Right]

  • Adjust Stamp Position

    You can adjust the position in which the stamp is printed.

    The position where the stamp is printed and the range within which that position can be adjusted are shown in the following table. The values for defaults and possible ranges given in the table are the distance from each side of the paper.

    Region A icon(mainly Europe and Asia)

    Stamp positions

    Default

    Possible range

    Top Left

    32 mm from the left edge

    8 mm from the top edge

    From 5 to 144 mm from the left edge

    From 5 to 144 mm from the top edge

    Top Center

    Center

    8 mm from the top edge

    From 0 to 72 mm to the right or left of the center

    From 5 to 144 mm from the top edge

    Top Right

    12 mm from the right edge

    8 mm from the top edge

    From 5 to 144 mm from the right edge

    From 5 to 144 mm from the top edge

    Bottom Left

    32 mm from the left edge

    8 mm from the bottom edge

    From 5 to 144 mm from the left edge

    From 5 to 144 mm from the bottom edge

    Bottom Center

    Center

    8 mm from the bottom edge

    From 0 to 72 mm to the right or left of the center

    From 5 to 144 mm from the bottom edge

    Bottom Right

    12 mm from the right edge

    8 mm from the bottom edge

    From 5 to 144 mm from the right edge

    From 5 to 144 mm from the bottom edge

    Region B icon(mainly North America)

    Stamp positions

    Default

    Possible range

    Top Left

    1.3 inches from the left edge

    0.3 inches from the top edge

    From 0.2 to 5.7 inches from the left edge

    From 0.2 to 5.7 inches from the top edge

    Top Center

    Center

    0.3 inches from the top edge

    From 0 to 2.8 inches to the right or left of the center

    From 0.2 to 5.7 inches from the top edge

    Top Right

    0.5 inches from the right edge

    0.3 inches from the top edge

    From 0.2 to 5.7 inches from the right edge

    From 0.2 to 5.7 inches from the top edge

    Bottom Left

    1.3 inches from the left edge

    0.3 inches from the bottom edge

    From 0.2 to 5.7 inches from the left edge

    From 0.2 to 5.7 inches from the bottom edge

    Bottom Center

    Center

    0.3 inches from the bottom edge

    From 0 to 2.8 inches to the right or left of the center

    From 0.2 to 5.7 inches from the bottom edge

    Bottom Right

    0.5 inches from the right edge

    0.3 inches from the bottom edge

    From 0.2 to 5.7 inches from the right edge

    From 0.2 to 5.7 inches from the bottom edge

  • Page to Stamp

    You can have the stamp printed on the first page or all pages.

    Default: [All Pages]

Change Job Serial No. for First Job

You can select whether or not to print the serial number after the stamped text. For details about how to specify the setting, see Printing text and serial numbers (classic).

Default: [Off]

Note

  • For details about how to change the Copier / Document Server Features, see "Accessing User Tools", Connecting the Machine/ System Settings.