Skip header
 

Procedure for Sort (Classic)

1Press [Finishing].

Operation panel screen illustration

2Select [Sort] or [Rotate Sort], and then press [OK].

Operation panel screen illustration

3Enter the number of copy sets using the number keys.

4Place the originals.

To confirm the type of finishing, press [Sample Copy].

5Press [Start].

Note

  • If you are copying from the exposure glass, a single copy of each original is made first. If the first copy set is acceptable, you can make the remaining copy sets by pressing [Sharp]. The time required for copy sets to be delivered varies depending on the print settings.

  • Paper sizes and orientations that can be used in the Rotate Sort function are as follows:

    • A4PortraitLandscape, A5PortraitLandscape, B5 JISPortraitLandscape, 81/2 × 11PortraitLandscape, 71/4 × 101/2PortraitLandscape, 41/8 × 91/2PortraitLandscape, C5 EnvPortraitLandscape, C6 EnvPortraitLandscape, DL EnvPortraitLandscape, 16KPortraitLandscape

  • When using the Rotate Sort function, the capacity may be reduced.

  • When the number of copies exceeds capacity, copying stops. If this happens, remove copies from the tray to resume copying.

  • The number of sheets that can be placed in Internal tray 1 is 500. For details about the number of sheets that can be placed in other output trays, see "Specifications", Maintenance and Specifications.

  • You can change the settings for the Sort function under [Input / Output] in User Tools. For details, see Input / Output.

PreviousNext