Previous
Use the following procedure to enable the automatic selection of a paper input location when the print data size matches the paper size.
Press [Home] (
) at the bottom of the screen in the center.
Flick the screen to the left, and then press the [User Tools] icon (
).
Press [Machine Features].
Press [Printer Features].
Press [
].
Press the [RPGL Menu] tab.
Press [
Next] until [43. Method to Auto Select Paper Input] appears.
Press [43. Method to Auto Select Paper Input].
Press [Auto 2: Long Edge and Short Edge] or [Auto 1: Long Edge], and then press [OK].
For RP-GL, select "Auto 2: Long Edge and Short Edge". For RP-GL/2, select "Auto 2: Long Edge and Short Edge" or "Auto 1: Long Edge".
Press [
Previous].
Press [20. Reproduction Ratio].
Make sure that "100.0%" is selected as the Reproduction Ratio, and then press [OK].
If a different value is displayed, enter "100.0%" using the number keys.
Press [User Tools] (
) on the top right of the screen.
Press [Home] () at the bottom of the screen in the center.
Print the data from the computer.
Paper is fed from the paper input location loaded with the size of paper determined by "47. Method to Determine Original Size".
For details about how to configure the settings in "43. Method to Auto Select Paper Input", see 43. Method to Auto Select Paper Input.
