Previous
Specify the line width and pen density by each pen from No. 0 to No. 15.
The pen numbers that can be specified for RP-GL/2 are 0 to 15, and 1 to 8 for RP-GL.
The line width can be specified in the following range. Lines are rendered in groups of dots, therefore the actual line width may be slightly different from the specified line width within the following range:
0.00-12.0 mm
The density can be specified in increments of 10% within the following range:
0-100%
The pen color can be specified using a palette number in the following range:
0-255
When you select [Custom Width (mm)] for pen width setting, specify the number for pen width in increments of 0.01 mm within the following range:
0.00–100.00 mm
When you select [Custom Width (dot)] for pen width setting, specify the number for pen width in increments of 0.01 dot within the following range:
0–2362 dot
For RP-GL/2, this function is effective if "Machine Setting(s)" is selected for "40. Pen Setting Priority".
The pen density specification is invalidated if "81. Color Mode" is set to "Color".
The pen color specification is invalidated if "81. Color Mode" is set to "Black & White".
The palette numbers can be confirmed in the color samples. For the color samples, see Printing the Color Sample.
