Skip header
 

Connecting to the Interface

This section explains how to identify the machine's interface and connect the machine according to the network environment.

Connecting to the interfaces illustration numbered callout illustration

  1. Wireless LAN port (optional)

    Port for using a wireless LAN

  2. Gigabit Ethernet port

    Port for using a 1000BASE-T, 100BASE-TX, or 10BASE-T cable

    Use this interface to connect the machine to a network.

    If you use an Ethernet interface cable that supports 1000BASE-T, set [Ethernet Speed] to [Auto Select: Enable 1Gbps] in [Interface Settings] in [System Settings].

  3. USB 2.0 [Type B] port

    Port for connecting a USB2.0 [Type B] interface cable

    This interface allows the machine to print over USB connection.

Note

  • The Gigabit Ethernet port and Wireless LAN interface unit cannot be used simultaneously. If the optional Wireless LAN interface unit is installed, you need to set [LAN Type] to [Wireless LAN] in [Interface Settings] in [System Settings].