Make sure no one gets on the machine, sits on it, leans on it, or hangs from it.
Specify the output location for originals before scanning them.
Two types of original output locations are available.
Original stackers
This is the basic original output location.
Original output guides
Originals are ejected onto the original output guides. When copying thick or hard originals, eject them onto this output location.
The following types of original should be ejected onto the original output guides:
Originals larger than A1 (D)
Original heavier than 157 g/m2 (42 lb.)
Plain paper that is 52 g/m2 (14 lb.) or lighter
Translucent (vellum) paper that is 80 g/m2 (21 lb.) or lighter