Skip header
 

Setting Up the Output Basket in A1/A2 (landscape)/D/C (landscape) Stack Mode

To stack A1/D or A2/C (landscape) paper properly, set up the output basket in A1/A2 (landscape)/D/C (landscape) stack mode.

1Make sure that the output basket is in the basic mode.

Illustration of the output basket

2Carefully pull out bar 1 horizontally until it stops.

Illustration of the output basket numbered callout illustration

  1. Bar 1

The output basket locks in the horizontal position.

Illustration of the output basket

3Slide bar 2 toward 2B.

Hold both ends of bar 2. Slide bar 2 until it clicks.

Illustration of the output basket numbered callout illustration

  1. Bar 2

  2. 2B

4Turn lever to 2C.

Illustration of the output basket numbered callout illustration

  1. Lever

  2. 2C

Illustration of the output basket

When you start printing, make sure that the output basket is open as shown above.

Printed paper is output as shown in the illustration.

Illustration of the output basket

Related topics

Set the output basket to its original position
PreviousNext