Previous
This section describes the user tools in the [Scan Settings] tab under [Scanner Features].
(mainly Europe): For details about the optional units required for this function, see "Functions Requiring Optional Configurations", Getting Started.
Next Original Wait Setting
When scanning multiple pages into a single file, you can select [Continuous Wait], [Off], or [Set Wait Time] as the standby mode for the additional originals.
If you press [Next Original Wait] when scanning originals, the machine waits indefinitely for additional originals, regardless of any other settings.
If you do not press [Next Original Wait], the settings you configure here determine the machine's performance as follows:
Default: [Set Wait Time], 60 second(s)
[Continuous Wait]
The machine waits indefinitely for additional originals and [Next Original Wait] does not appear.
[Off]
The machine does not wait for additional originals and sends the scan file immediately.
[Set Wait Time]
The machine waits for additional originals until the pre-specified wait period elapses.
Background Density of ADS (Full Color)
Characteristics due to the type of paper such as nonwhiteness like newspaper or transparent originals can be reduced by correcting the scanning density.
Default: The default setting is the middle of 5 adjustment levels.
Reproduction Ratio
You can change the scale factor table of "Specify Reproduction Ratio" to user specified values.
Select the pre-determined scale factors, or enter any desired values.
Magnification Key Display 
(mainly North America)
Specify which scale's reproduction ratios shown on the initial display.
Default: [Engineering]
Program / Change / Delete Scan Size
You can register, change or delete the original scan size settings to be used in [Custom Size] or [Partial Scan].
The settings configured here will be displayed in [Scan Size].
Up to 5 settings can be registered.
For details about how to change the Scanner Features, see "Accessing User Tools", Connecting the Machine/ System Settings.
