Skip header
 

Printing a Hold Print file using the control panel

Important

  • When printing is completed, the stored file will be deleted.

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Press the [Printer] icon.

3Press the [Print Jobs] tab.

Operation panel screen illustration

4Press [Hold Print Job].

5Select the files you want to print.

You can select all the Hold Print files at once by pressing [Select All Jobs] after selecting a file.

6If necessary, press [Preview] to check the print image of the document.

Only the first page of the document is displayed in the preview screen. No previews can be displayed when more than one document is selected.

Press [Exit] to close the preview screen.

7Press [Print].

8To change the print settings of the document, press [Detailed Settings].

For details about the settings that can be configured, see Settings That Can Be Configured on the Control Panel.

9Enter the number of copies using the number keys if necessary, and then press [Print].

Note

  • If you change the number of copies when multiple documents are selected, the newly specified number of copies will be printed for all of the selected documents. If you do not change the number, the number of copies specified when the documents were stored will be printed for each document.

  • If printing of a Hold Print file is scheduled at a certain time and you want to print the file before the time specified, print the document using the control panel.

  • To stop printing after printing has started, press [Job Reset] or [Stop] on the [Printer] screen. The file will be deleted.

  • You can also print a Hold Print file from Web Image Monitor. For details, see Web Image Monitor Help.