Skip header
 

Sending a Hold Print file

1Click the WordPad menu button in the upper left corner of the window, and then click [Print].

2In the "Select Printer" list, select the printer you want to use.

3Click [Preferences].

4In the "Job Type:" list, click [Hold Print].

5Click [Details...].

6Enter a User ID in the "Enter User ID:" box.

You can optionally set a file name of a Hold Print file.

7To specify the print time of the document, select the [Set Print Time] check box, and then specify the time.

You can specify the time in 24-hour format.

8Click [OK].

9Change any other print settings if necessary.

10Click [OK].

11Start printing from the application's [Print] dialog box.

Note

  • When the specified print time is close to the time in the machine's built-in clock, printing may start immediately.

  • When the main power of the machine is turned off, printing will not start even if it is the specified print time. To print a document whose specified time has already passed, set [Jobs Not Printed As Machn. Was Off] to [Print When Machine On] on the [System] tab under [Printer Features]. For details, see System.

  • If an error message is displayed on the control panel, printing will not start even if it is the specified print time.