Skip header
 

Changing a User Code

Important

  • Even if you change a user code, the counter value will not be cleared.

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Flick the screen to the left, and then press the [Address Book Management] icon on Home screen 4.

3Check that [Program / Change] is selected.

4Select the user whose user code you want to change.

Press the name key, or enter the registered number using the number keys.

You can search by the registered name, user code, fax number, folder name, e-mail address, or IP-Fax destination.

5Press [Auth. Info].

6Press [Change] under "User Code".

Operation panel screen illustration

7Enter the new user code using the number keys, and then press the [Hash] key.

8To change the available functions, press [Down arrow keyNext] to display "Available Functions".

9Press the key to select the functions to enable them.

10Press [OK].

11Press [User Tools] (Operation panel screen illustration) on the top right of the screen.

12Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

Note