Skip header
 

Connecting a Device to the Machine's USB Host Interface

This section explains how to connect a device to the machine's USB host interface.

CAUTION

  • Properly shielded and grounded cables and connectors must be used for connections to a host computer (and/or peripheral) in order to meet emission limits.

  • Connect any of the following devices to the USB 2.0 interface: Digital camera, Bluetooth devices, USB keyboards, and IC card readers. Connecting other devices may cause a malfunction.

1Connect one end of the USB interface device to the machine's USB host interface.

If you are using a USB interface cable, connect the other end of it to a device such as card authentication one.

Illustration of connecting the USB interfece cable

Note

  • To connect via Bluetooth, enable Bluetooth settings by the Web Image Monitor or telnet. For details about the settings, see Web Image Monitor Help or set.

  • This machine does not come with a USB interface cable. Make sure you purchase the appropriate cable for the machine (connector shape) and the device.

  • Use a 5 m (197 inches) or shorter cable which supports USB Host Interface.

  • Do not connect or disconnect the Bluetooth interface unit while the machine is turned on.

PreviousNext