Skip header
 

Changing Default Settings

This section describes how to change the settings of User Tools.

Important

  • If Administrator Authentication Management is specified, contact your administrator.

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Flick the screen to the left, and then press the [User Tools] (Operation panel screen illustration) icon on Home screen 4.

3Select the settings you want to change.

To change the user tool in [System Settings], press [Machine Features], and then press [System Settings].

Operation panel screen illustration

4Change settings by following instructions on the display, and then press [OK].

Note

  • To cancel changes made to settings and return to the initial display from [Screen Features], press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

  • To cancel changes made to settings and return to the initial display from [Machine Features], [Counter], [Inquiry], [Address Book Management], and [Tray Paper Settings], press [User Tools] (Operation panel screen illustration) on the top right of the screen, and then press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

  • For details about specifying Screen Features, see Screen Features.

  • For details about specifying System Settings under Machine Features, see System Settings.

  • For details about specifying Address Book Management, see Administrator Tools.

  • For details about specifying Tray Paper Settings, see Tray Paper Settings.

  • For details about changing the language, see "Changing the Display Language", Getting Started.

  • For details about checking Inquiry, see "Inquiry", Maintenance and Specifications.