Improving Throughput when Continuously Printing on Paper of Different Types or Thicknesses
Previous
When printing is performed continuously on paper of different types or thicknesses, the waiting time prior to printing may be long due to the temperature to allow paper feeding, resulting in lower throughput.
In [Advanced Settings] for the custom paper, adjust the value in 102: [Adj Fsng Temp to Trnsf Ppr: Heat Roller].
Press [+] to reduce the waiting time, or [－] to increase.
In [Advanced Settings] for the custom paper, set the fusing heat roller temperature to 180 degrees.
<Printing in full color>
Select 088: [Fusing Heat Roller Temp. Adjust.: FC].
<Printing in black and white>
Select 089: [Fusing Heat Roller Temp. Adjust.: B&W].
Print the image. Has any image quality problem occurred?
Yes |
You cannot improve throughput under the present condition. Restore the previous setting. |
No |
You can operate the machine using this setting. |
To adjust the following settings, pre-register the type of paper in use as a custom paper. For details about registering custom papers, see "Registering a Custom Paper", Paper Settings.
If waiting time becomes shorter, a paper jam or glossy ghosting may occur.
