Previous
After receiving a print job, the machine usually stops to let the fusing temperature reach an appropriate level for printing.
The waiting time for the fusing unit to cool down may be quite long, especially before printing on thin paper. By decreasing the fusing temperature during standby, you can reduce the waiting time.
By changing the fusing temperature to feed paper after warm-up, you can also reduce the waiting time.
When printing on paper other than thin paper, we recommend leaving the fusing temperature settings unchanged.
After performing the solution, it is recommended to perform the color calibration of the external controller. For details see, Operating Procedure for Color Calibration.
In the 02: [Machine: Image Quality] group on the [Adjustment Settings for Skilled Operators] menu, select 0206: [Adjust Fusing Temperature on Standby].
Decrease the temperature by 15 degrees.
