Adjust the position to end printing the image at the trailing edge of the top (right) part of the image to be printed on side 2.
Press [+] to move the position closer to the paper's top part and [-] to move it away.
Calculate the adjustment value with the following formula:
Adjustment at trailing edge (mm) ×500 (mm) ÷ Paper width (mm) in paper feed direction = Adjustment value (mm)
Setting Item |
Max. Value |
Min. Value |
Step |
Unit |
---|---|---|---|---|
[Correct Trapezoidal Distortion: Side 2 Right Edge] |
0.25 |
-0.25 |
0.01 |
mm |