Menu Items and Functions: Advanced Settings

001

[Adj Image Position of Side1 Across Feed]

Adjust the vertical position of the image to be printed on Side 1/Side 2 of the paper.

002

[Adj Image Position of Side2 Across Feed]

003

[Adj Image Position of Side1 With Feed]

Adjust the horizontal position of the image to be printed on Side 1/Side 2 of the paper.

004

[Adj Image Position of Side2 With Feed]

005

[Adj Magnification of Side1 Across Feed]

Adjust the vertical image scaling on the Side 1/Side 2 of the paper according to the paper expansion or shrinkage.

To make this adjustment without adjusting the scale according to the paper expansion or shrinkage, set 118: [Act Aut Crct Snsr for 2 Sdd Mgnf Adj]] to [Deactivate].

006

[Adj Magnification of Side2 Across Feed]

007

[Adj Magnification of Side1 With Feed]

Adjust the horizontal image scaling on the Side 1/Side 2 of the paper according to the paper expansion or shrinkage.

To make this adjustment without adjusting the scale according to the paper expansion or shrinkage, set 118: [Act Aut Crct Snsr for 2 Sdd Mgnf Adj] to [Deactivate].

008

[Adj Magnification of Side2 With Feed]

009

[Correct Trapzdl. Distrtn.: Sd 1 Left Edg]

Adjust the position to start printing the image at the trailing edge of the bottom (left) part of the image to be printed on side 1.

010

[Correct Trapzdl. Distrtn.: Sd 1 Rigt Edg]

Adjust the position to end printing the image at the trailing edge of the top (right) part of the image to be printed on side 1.

011

[Correct Trapzdl. Distrtn.: Sd 2 Left Edg]

Adjust the position to start printing the image at the trailing edge of the bottom (left) part of the image to be printed on side 2.

012

[Correct Trapzdl. Distrtn.: Sd 2 Rigt Edg]

Adjust the position to end printing the image at the trailing edge of the top (right) part of the image to be printed on side 2.

013

[Adjust Erase Margin of Leading Edge]

Adjust the mask width at the leading edge of the image.

014

[Adjust Erase Margin of Trailing Edge]

Adjust the mask width at the trailing edge of the image.

015

[Skew Detection]

Specify whether or not to detect paper skew.

016

[Transfer Timing Roller Feed Speed Adj]

Adjust the transfer timing roller speed.

017

[Paper Transfer Feed Speed Adjustment]

Adjust the transfer roller speed.

018

[Adjust Toner Adhesion (Black)]

Adjust the toner adhesion to the intermediate transfer belt for each color.

019

[Adjust Toner Adhesion (Cyan)]

020

[Adjust Toner Adhesion (Mgenta)]

021

[Adjust Toner Adhesion (Yellow)]

022

[Image Transfer Current: B&W]

Adjust the current for the image transfer roller when printing in black and white.

023

[Image Transfer Current: FC: Black]

Adjust the current for the image transfer roller for each color when printing in full color.

024

[Image Transfer Current: FC: Cyan]

025

[Image Transfer Current: FC: Magenta]

026

[Image Transfer Current: FC: Yellow]

027

[Image Trnsf Current; Lead Edge: B&W]

Adjust the image transfer current at the leading edge of the paper when printing in black and white.

028

[Image Trnsf Currnt; Lead Edg Dist: B&W]

Specify the area to apply image transfer current at the leading edge of the paper when printing in black and white.

029

[Image Trnsf Current; Lead Edge: FC: K]

Adjust the image transfer current at the leading edge of the paper when printing in full color (black).

030

[Image Trnsf Currnt; Lead Edg Dist: FC: K]

Specify the area to apply the image transfer current at the leading edge of the paper when printing in full color (black).

031

[Image Trnsf Current; Lead Edge: FC: C]

Adjust the image transfer current at the leading edge of the paper when printing in full color (cyan).

032

[Image Trnsf Currnt; Lead Edg Dist: FC: C]

Specify the area to apply the image transfer current at the leading edge of the paper when printing in full color (cyan).

033

[Image Trnsf Current; Lead Edge: FC: M]

Adjust the image transfer current at the leading edge of the paper when printing in full color (magenta).

034

[Image Trnsf Curnt; Lead Edg Dist: FC: M]

Specify the area to apply the image transfer current at the leading edge of the paper when printing in full color (magenta).

035

[Image Trnsf Current; Lead Edge: FC: Y]

Adjust the image transfer current at the leading edge of the paper when printing in full color (yellow).

036

[Image Trnsf Currnt; Lead Edg Dist: FC: Y]

Specify the area to apply the image transfer current at the leading edge of the paper when printing in full color (yellow).

037

[Paper Transfer Current: B&W: Side 1]

Adjust the paper transfer current applied to the Side 1/Side 2 of the paper when printing in black and white.

038

[Paper Transfer Current: B&W: Side 2]

039

[Paper Transfer Current; Lead Edge: B&W]

Adjust the paper transfer current at the leading edge of the paper when printing in black and white.

040

[Ppr Transfer Current Lead Edg Dist: BW]

Specify the area to apply paper transfer current at the leading edge of the paper when printing in black and white.

041

[Paper Transfer Current; Trail Edge: B&W]

Adjust the paper transfer current at the trailing edge of the paper when printing in black and white.

042

[Ppr Transfer Current Trail Edg Dist: BW]

Specify the area to apply the paper transfer current at the trailing edge of the paper when printing in black and white.

043

[Paper Transfer Current: FC: Side 1]

Adjust the paper transfer current applied to the Side 1/Side 2 of the paper when printing in full color.

044

[Paper Transfer Current: FC: Side 2]

045

[Paper Transfer Current; Lead Edge: FC]

Adjust the paper transfer current at the leading edge of the paper when printing in full color.

046

[Ppr Transfer Current Lead Edg Dist: FC]

Specify the area to apply the paper transfer current at the leading edge of the paper when printing in full color.

047

[Paper Transfer Current; Trail Edge: FC]

Adjust the paper transfer current at the trailing edge of the paper when printing in full color.

048

[Ppr Transfer Current Trail Edg Dist: FC]

Specify the area to apply the paper transfer current at the trailing edge of the paper when printing in full color.

049

[Paper Transfer AC Mode]

Specify whether or not to enable AC mode. If set to [On], the settings (050-071) are enabled.

050

[Ppr Trnsf AC: AC Voltage: B&W: Side 1]

Adjust the paper transfer voltage applied to Side 1/Side 2 when printing in black and white with AC mode enabled.

051

[Ppr Trnsf AC: AC Voltage: B&W: Side 2]

052

[Ppr Trnsf AC: AC Voltage: FC: Side 1]

Adjust the paper transfer voltage applied to Side 1/Side 2 when printing in full color with AC mode enabled.

053

[Ppr Trnsf AC: AC Voltage: FC: Side 2]

054

[Ppr Trnsf AC: AC Duty Cycle: B&W]

Adjust the duty cycle of the AC voltage for the paper transfer applied to Side 1/Side 2 when printing in black and white or full color with AC mode enabled.

055

[Ppr Trnsf AC: AC Duty Cycle: FC]

056

[Ppr Trnsf AC: DC Current: B&W: Side 1]

Adjust the paper transfer current applied to Side 1/Side 2 when printing in black and white with AC mode enabled.

057

[Ppr Trnsf AC: DC Current: B&W: Side 2]

058

[Ppr Trnsf AC: DC Current: FC: Side 1]

Adjust the paper transfer current applied to Side 1/Side 2 when printing in full color with AC mode enabled.

059

[Ppr Trnsf AC: DC Current: FC: Side 2]

060

[Paper Transfer AC: Lead Edge AC: B&W]

Adjust the paper transfer voltage at the leading edge of the paper when printing in black and white.

061

[Paper Transfer AC: Lead Edge DC: B&W]

Adjust the paper transfer current at the leading edge of the paper when printing in black and white.

062

[Paper Transfer AC: Lead Edg Dist: B&W]

Specify the area to apply the paper transfer current at the leading edge of the paper when printing in black and white.

063

[Paper Transfer AC: Lead Edge AC: FC]

Adjust the paper transfer voltage at the leading edge of the paper when printing in full color.

064

[Paper Transfer AC: Lead Edge DC: FC]

Adjust the paper transfer current at the leading edge of the paper when printing in full color.

065

[Paper Transfer AC: Lead Edg Dist: FC]

Specify the area to apply paper transfer current at the leading edge of the paper when printing in full color.

066

[Paper Transfer AC: Trail Edge AC: B&W]

Adjust the paper transfer voltage at the trailing edge of the paper when printing in black and white.

067

[Paper Transfer AC: Trail Edge DC: B&W]

Adjust the paper transfer current at the trailing edge of the paper when printing in black and white.

068

[Paper Transfer AC: Trail Edg Dist: B&W]

Specify the area to apply paper transfer current at the trailing edge of the paper when printing in black and white.

069

[Paper Transfer AC: Trail Edge AC: FC]

Adjust the paper transfer voltage at the trailing edge of the paper when printing in full color.

070

[Paper Transfer AC: Trail Edge DC: FC]

Adjust the paper transfer current at the trailing edge of the paper when printing in full color.

071

[Paper Transfer AC: Trail Edg Dist: FC]

Specify the area to apply the paper transfer current at the trailing edge of the paper when printing in full color.

072

[Ppr Trns CV Start Timing: B&W: Side 1]

Adjust the timing to start the constant voltage control for the bias during paper transfer applied to Side 1/Side 2 when printing in black and white.

073

[Ppr Trns CV Start Timing: B&W: Side 2]

074

[Ppr Trns CV Cntrl Duratn: B&W: Side 1]

Adjust the duration of the constant voltage control for the bias during paper transfer applied to Side 1/Side 2 when printing in black and white.

075

[Ppr Trns CV Cntrl Duratn: B&W: Side 2]

076

[Ppr Trnsf Cnstnt Voltage: B&W: Side 1]

Adjust the constant voltage control for the bias applied to the Side 1/Side 2 when printing in black and white.

077

[Ppr Trnsf Cnstnt Voltage: B&W: Side 2]

078

[Ppr Trns CV Start Timing: FC: Side 1]

Adjust the timing to start the constant voltage control for the bias during paper transfer applied to Side 1/Side 2 when printing in full color.

079

[Ppr Trns CV Start Timing: FC: Side 2]

080

[Ppr Trns CV Cntrl Duratn: FC: Side 1]

Adjust the duration of the constant voltage control for the bias during paper transfer applied to Side 1/Side 2 when printing in full color.

081

[Ppr Trns CV Cntrl Duratn: FC: Side 2]

082

[Ppr Trnsf Constant Voltage: FC: Side 1]

Adjust the constant voltage control for the bias applied to the Side 1/Side 2 when printing in full color.

083

[Ppr Trnsf Constant Voltage: FC: Side 2]

084

[Adjust Gap of Paper Transfer]

Adjust the gap between the intermediate transfer belt and the paper transfer roller when the paper is fed through the paper transfer roller.

085

[Adjust Contact Timing of Ppr Trns]

Adjust the timing for the intermediate transfer belt and the paper transfer unit to come into contact during paper contact/ separation.

086

[Adjust Disengage Timing of Ppr Trns]

Adjust the timing for the intermediate transfer belt and the paper transfer unit to separate during paper contact/separation.

087

[Paper Transfer High Pressure Mode]

Adjust the transferability at the paper transfer unit.

088

[Fusing Heat Roller Temp. Adjust.: FC]

Adjust the heat roller temperature.

089

[Fusing Heat Roller Temp. Adjust.: B&W]

090

[Fusing Pressr. Rllr. Temp. Adjst.: FC]

Adjust the pressure roller temperature.

091

[Fusing Pressr. Rllr. Temp. Adjst.: B&W]

092

[Fusing Nip Width Setting]

Adjust the nip width between the fusing belt and pressure roller (not applied to envelopes).

093

[Put Pressure before Fusing]

Specify whether or not to have the fusing pressure roller come into contact with the fusing belt before the printing operation (paper feeding) starts.

094

[Adjust Adding Fusing Temperature 1]

Adjust the temperature applied to the fusing unit at the start of paper transfer.

095

[Adjust Adding Fusing Temperature 2]

Adjust the temperature applied to the fusing unit immediately before the start of paper transfer.

096

[Adjust Cleaning Web Motor Interval]

Specify the interval between each activation of the cleaning web.

097

[Cleaning Web Contact and Disengage]

Specify how the cleaning web comes into contact and separates.

098

[Pressure Roller Cooling Fan Setting]

Specify how the cooling fan of the pressure roller moves.

099

[Adj Cntct Frq of Fusng Blt Smthng Rllr]

Use the fusing belt smoothing roller to clean the fusing belt stained with toner.

100

[Cleaning Web Contact & Diseng Position]

Specify the point of cleaning web contact/separation during printing.

101

[Fusing Nip Width Adj. for Envelope]

Adjust the nip width between the fusing belt and pressure roller when an envelope is being fed.

102

[Adj Fsng Temp to Trnsf Ppr: Heat Roller]

Specify the fusing temperature to feed after warm-up to print.

103

[Adj Fsng Temp to Trnsf Ppr: Pressr Rllr]

104

[Updraft Fan]

Adjust the airflow of the updraft fan of the paper tray.

105

[Blower Fan]

Adjust the airflow of the blower fan of the paper tray.

106

[Side Fan]

Adjust the airflow of the side fan of the paper tray.

107

[Vacuum Fan]

Adjust the airflow of the vacuum fan of the paper tray.

108

[Updraft Fan Shutter]

Specify how the updraft fan shutter of the paper tray moves.

109

[Side Fan Shutter]

Specify how the side fan shutter of the paper tray moves.

110

[Switch Paper Load Upper Limit]

Switch the upper limit for sheets of paper to be loaded in the paper tray.

111

[Paper Feed Mode (Adjust Fan Level)]

Specify how the paper tray fan moves.

112

[Double Feed Detection]

Specify whether or not to detect double feeding of paper.

113

[Adjust Registration Gate Home Position]

Adjust the registration gate position.

114

[Illumin. Mode for Color Paper Detctn.]

Specify the detection method of the paper edge detection sensor.

115

[Color Paper Edge Detection Adjustment]

Adjust the luminance of the paper edge detection sensor.

116

[Regist Jam Detection with Feed Dir]

Specify whether or not to stop printing if the horizontal misalignment of the delivered paper exceeds the adjustable range (3 mm/0.1 inch).

117

[Deactivate Image Position Adjustment]

Specify whether or not to disable the machine's function to automatically detect paper pathway deviations during paper feeding and adjust the vertical position of the print image accordingly.

118

[Act Aut Crct Snsr for 2 Sdd Mgnf Adj]

The machine measures the length and width of both sides of the paper and specifies the magnification ratio of the image on the back side according to the shrinking or transfiguration of the image.

119

[Process Speed Setting]

Adjust the machine's operating speed.

120

[Feed Speed Adj. of Tr.-Fusg. Tr. Belt 1]

Adjust the speed of the conveyer belt at the paper transfer unit.

121

[Feed Speed Adj. of Tr.-Fusg. Tr. Belt 2]

Adjust the speed of the conveyer belt at the fusing unit.

122

[Fusing Feed Speed Adjustment]

Adjust the fusing roller's speed.

123

[Decurlr 1 Trnsprt Motor Feed Speed Adj]

Adjust the paper feed speed of the decurler unit.

124

[Decurlr 2 Trnsprt Motor Feed Speed Adj]

125

[Cooling Transport Motor Feed Speed Adj]

Adjust the feed speed of the cooling transport motor.

126

[CPM Adjustment]

Adjust the interval between feeding each sheet.

127

[Adjust Paper Curl]

Specify whether or not to straighten curled sheets.

128

[Adjust Paper Curl: Temp. Adjustment 1]

Adjust the machine's internal temperature to reduce paper curling.

129

[Adjust Paper Curl: Temp. Adjustment 2]

130

[Adjust Paper Curl: CPM Adjustment 1]

Increase the interval between paper delivery to reduce paper curling.

131

[Adjust Paper Curl: CPM Adjustment 2]

132

[Rdc. Init. CPM: 1 Sd.: Low Tmp. Envir.]

Adjust the level of reducing the print speed at the start of paper transfer when printing on side 1 in low-temperature environments.

133

[Rdc. Init. CPM: 1 Sd.: N/H Tmp. Envir.]

Adjust the level of reducing the print speed at the start of paper transfer when printing on side 1 in normal room temperature and higher temperature environments.

134

[Rdc. Init. CPM: 2 Sd.: Low Tmp. Envir.]

Adjust the level of reducing the print speed at the start of paper transfer when printing on side 2 in low-temperature environments.

135

[Rdc. Init. CPM: 2 Sd.: N/H Tmp. Envir.]

Adjust the level of reducing the print speed at the start of paper transfer when printing on side 2 in normal room temperature and higher temperature environments.

136

[Adjust Z-fold Position 1]

Adjust the width of the bottom end segment of Z-folded sheets when using the multi-folding unit.

137

[Adjust Z-fold Position 2]

Adjust the overall fold size of Z-fold sheets when using the multi-folding unit.

138

[Half Fold Position: Single-sheet Fold]

Adjust the fold position of half fold sheets when using the multi-folding unit.

139

[Letter Fold-out Posn 1: Single-sheet Fld]

Adjust the fold position for the bottom segment of letter fold-out sheets when using the multi-folding unit.

140

[Letter Fold-out Posn 2: Single-sheet Fld]

Adjust the overall fold size of letter fold-out sheets when using the multi-folding unit.

141

[Letter Fold-in Posn 1: Single-sheet Fold]

Adjust the fold position of the bottom segment of letter fold-in sheets when using the multi-folding unit.

142

[Letter Fold-in Posn 2: Single-sheet Fold]

Adjust the overall fold size of letter fold-in sheets when using the multi-folding unit.

143

[Double Parallel Fold Position 1]

Adjust the fold position of the bottom segment 1 of double parallel folded sheets when using the multi-folding unit.

144

[Double Parallel Fold Position 2]

Adjust the fold position of the bottom segment 2 of double parallel folded sheets when using the multi-folding unit.

145

[Adjust Gate Fold Position 1]

Adjust the fold width of the bottom segment 1 of gate folded sheets when using the multi-folding unit.

146

[Adjust Gate Fold Position 2]

Adjust the fold width of the bottom segment 2 of gate folded sheets when using the multi-folding unit.

147

[Adjust Gate Fold Position 3]

Adjust the fold position of the bottom segment 3 of gate folded sheets when using the multi-folding unit.

-

[Registration to Align Front and Back Images Using Template]

Adjust the image position so it is the same on either side of the paper.

For details see the "Troubleshooting".