Previous
Message |
Status |
|---|---|
“Calibrating...” |
The printer is calibrating the color. Wait a while. |
“Energy Saver Mode” |
The printer is in Energy Saver mode. Press any key to recover to the normal mode. |
“Hex Dump Mode” |
In Hex Dump mode, the printer receives data in a hexadecimal format. Turn off the printer after printing, and then turn it on again. |
“Job Suspended” |
All jobs are suspended. Turn off the printer, and turn it on again to resume the jobs. |
“Offline” |
The printer is offline and cannot print. |
“Please wait...” |
This message may appear for a few seconds. It means the printer is initializing, replenishing toner, or performing maintenance operations. Wait a while. |
“Printing...” |
The printer is printing. Wait a while. |
“Printing Suspended” |
Printing is suspended. To resume printing, press the [Suspend/Resume] key. |
“Ready” |
This is the default ready message. The printer is ready for use. No action is required. |
“Resetting Job” |
The printer is resetting the print job. Wait a while. |
“Setting change...” |
The printer is applying the changes made to its settings. Wait a while. |
“Updating Certificate...” |
The printer is updating the @Remote certificate. Turn the power off, and then turn it on again. |
“Waiting for print data...” |
The printer is waiting for the next data to print. Wait a while. |
