Skip header
 

PictBridge printing

Important

  • Do not disconnect the USB cable while data is being sent to the printer. If you do, printing will fail.

1Check the printer and the digital camera are both switched on.

2Using a USB cable, connect the digital camera to the printer's USB port A or the media slot.

For details about connecting the digital camera to the printer's USB port A, see Digital camera connection.

3On your digital camera, select the images you want to print, and specify the printing conditions.

4The printer receives settings from the digital camera and starts printing.

5When printing is finished, check that the control panel of the printer is displaying “Ready”, and disconnect the USB cable from the printer.

Note

  • Since printing conditions are specified on the digital camera, specifiable meters depend on the particular digital camera. For details, see your digital camera's manual.

  • Some digital cameras require settings for manual PictBridge operation. For details, see your digital camera's manual.

PreviousNext