Previous
Configuration:
Desktop
Print process:
LED alley and electro-photographic printing
First print speed:
(mainly Europe and Asia)
4.48 seconds
(mainly North America)
4.51 seconds
Print speed:
One-side printing: 38 pages per minute (A4
, 81/2 × 11)
Two-side printing: 29 pages per minute (A4, 81/2 × 11)
Resolution:
1200 × 1200 dpi
600 × 600 dpi
Paper size:
For details, see Paper Size Specifications.
Paper weight:
For details, see Paper Type Specifications.
Paper output capacity:
Standard 500 sheets (80 g/m2, 20 lb. BOND)
Paper input capacity:
Tray |
Paper capacity*1 |
|---|---|
Standard paper feed tray |
500 sheets |
Bypass tray |
100 sheets |
500-sheet paper feed unit |
500 sheets |
*1 Paper weight: 80 g/m2 (20 lb. BOND)
Power requirements:
- (mainly Europe and Asia)
220–240 V, 50/60 Hz, 5.3 A
- (mainly North America)
120–127 V, 60 Hz, 10 A
Power consumption (complete system):
Maximum: 1,073 W
The complete system consists of the main unit and the three optional paper feed units.
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Warm-up time (23 °C (73.4 °F), rated voltage):
16.6 seconds
Dimensions:
Width |
Depth |
Height |
|
|---|---|---|---|
Printer only (tray not extended) |
459 mm (18.1 inches) |
392 mm (15.5 inches) |
347.5 mm (13.7 inches) |
With Hard Disk |
475 mm (18.8 inches) |
392 mm (15.5 inches) |
347.5 mm (13.7 inches) |
Weight:
- (mainly Europe)
20.4 kg (45.0 lb.)
- (mainly Asia)
20.2 kg (44.6 lb.)
- (mainly North America)
20.2 kg (44.6 lb.)
Noise emission:
Sound power level:
Main unit only
Stand-by
27.1 dB (A)
Printing
63.7 dB (A)
Complete system
Stand-by
27.1 dB (A)
Printing
64.5 dB (A)
Sound pressure level:
Main unit only
Stand-by
16.5 dB (A)
Printing
52.6 dB (A)
Complete system
Stand-by
16.5 dB (A)
Printing
51.3 dB (A)
Sound power levels and sound pressure levels are actual values measured in accordance with ISO 7779.
Sound pressure levels are measured from the position of the bystander.
The complete system consists of the main unit and the three optional paper feed units.
Memory:
Standard 512 MB, up to 1 GB (with the optional SDRAM module)
Hard disk:
250 GB (Optional)
Interfaces:
Standard:
Gigabit Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
USB 2.0
To use USB 2.0, a USB computer port and cable that support USB 2.0 are required.
USB Host
SD card slot
Optional:
IEEE 802.11a/b/g/n (Wireless LAN)
Parallel (Bidirectional IEEE 1284)
USB device server (10BASE-T/100BASE-TX/1000BASE-T)
Printer Language:
PCL5e/6, PostScript 3, PDF, XPS (optional)
Fonts:
PCL 5e/PCL 6:
45 fonts, 13 International fonts
PostScript 3, PDF:
136 fonts
Network:
Topology: The physical or logical layout of the nodes (devices) in a network (10BASE-T/100BASETX/1000BASE-T)
Protocol: TCP/IP (IPv4, IPv6), IPX/SPX
First print speed, power consumption, warm-up time, sound power level and sound pressure level may differ depending on the conditions and environment of the printer.
