Skip header
 

Auto e-mail notification

1Log in to Web Image Monitor in administrator mode.

For details, see Displaying the top page.

2Click [Configuration] on the [Device Management] menu.

3Under "Device Settings", click [Auto Email Notification].

The dialog box for configuring notification settings appears.

4Configure the following settings:

  • Notification Message: You can set this according to your needs. For example, you can configure printer's location and the service representative's contact information.

  • Items in the Groups to Notify column: E-mail notification addresses can be grouped as required.

  • Items in the Select Groups/Items to Notify column: Select groups for each notification type, such as printer status and error.

    To configure detailed settings for these items, click [Edit] next to "Detailed Settings of Each Item".

5Click [OK].

6Click [Logout].

7Quit Web Image Monitor.

Note

  • For details about the settings, see Web Image Monitor Help.

PreviousNext