Skip header
 

Use this function to repeat an image twice on the same sheet of paper.

Illustration of repeating the image twice

1Press the [Combine/Repeat] key.

Combine/Repea key illustration

2Use the [Up arrow key] [Down arrow key] key to select [Repeat 2], and then press the [OK] key.

Operation panel screen illustration

3Use the [Up arrow key] [Down arrow key] keys to select original and paper size, and then press the [OK] key.

Operation panel screen illustration

4Set your original.

5Make sure the [Master Making] mode select key is lit.

If it is not lit, press the [Master Making] mode select key.

Master Making mode select key illustration

6Enter the number of prints you want using the number keys.

Number keys illustration

7Press the [Start] key.

Start key illustration

Printing starts automatically after the trial print.

Note

  • You can choose to have either Combine or Repeat selected by default when the power is turned on. For details see [Mode Settings].

  • If you want to check the image before printing, press the [Auto Cycle] key before pressing the [Start] key, in order to disable Auto Cycle mode. See When Auto Cycle Mode Is Off.