Previous
Open the front cover.
Remove the tab paper end fence.
Pull open the tray until it stops.
Remove any paper in the tray.
Remove the 2 screws, and then remove the side plate.
Remove the 2 screws, and then pull out the paper feed unit until it stops.
Remove the screw, and then slide the bracket.
Remove the paper feed roller in the following order:
(1) Snap ring and pick-up roller
(2) Snap ring and feed roller
(3) Snap ring and separation roller
Attach the new paper feed roller in the following order:
(1) Separation roller and snap ring
(2) Feed roller and snap ring
(3) Pick-up roller and snap ring
Slide the bracket back to its original position, and then secure it with the screw.
Push the paper feed unit into the machine, and then secure it with the 2 screws.
Align the markers, and then secure the side plate with the 2 screws.
Push the tray back into the machine.
Attach the tab paper end fence.
Close the front cover.
Reset the counter for replaceable parts.
