Adjust the level of reducing the print speed at the start of paper transfer in low-temperature environments.
The setting specified in 132: [Rdc. Init. CPM: Low Tmp. Envir.: Qual.] is applied in the following cases:
Printing in full color including the clear toner and the special color is set to high quality
Printing in full color including the white toner
The setting will take effect if the ambient temperature is 17°C (62.6°F) or lower. Since the temperature of the fusing unit may decrease in a cold environment, specify this setting in addition to 133: [Rdc. In. CPM: N./H. Temp. Envr.: Prod.] and 134: [Rdc. In. CPM: N./H. Temp. Envr.: Qual.].
Setting Item |
Values |
---|---|
[Reduce Initial CPM: Low Temp. Envrnmt.: Productivity] |
[Do not Reduce]: Full speed. [Reduce Level 1]: 80% of full speed [Reduce Level 2]: 65% of full speed [Reduce Level 3]: 50% of full speed |