Previous
Adjust the intervals to feed each sheet of paper after fusing is performed in the following conditions:
Printing in full color including the clear toner and the special color is set to high quality
Printing in full color including the white toner
The standard interval is "100". If you set this to "50", the throughput will be reduced in half.
Press [+] to increase the interval and [－] to reduce it.
Depending on the fusing unit's temperature and the size of paper, if you increase the interval by pressing [－], the copy/print speed may decrease.
Setting Item |
Max. Value |
Min. Value |
Step |
Unit |
|---|---|---|---|---|
[Paper Feed Interval Setting: Quality] |
100 |
1 |
1 |
% |
