Message |
Cause |
Solution |
---|---|---|
“Booklet/Half Fold Error” |
The job was canceled because you specified invalid settings for saddle stitching or half fold. |
Check the settings for saddle stitching or half fold. |
“Classification Code is incorrect.” |
The classification code has not been entered, or the classification code has been entered incorrectly. |
Enter the correct classification code. |
“Classification Code is incorrect.” |
The classification code is not supported with the printer driver. |
Select [Optional] for classification code. For details about how to specify classification code settings, see "Configuring Classification Codes", Print. |
“Duplex Cancelled” |
Duplex printing was canceled. |
|
“Exceeded Max. Pages (Collate)” |
The number of pages exceeds the maximum number of sheets that you can use Collate with. |
Reduce the number of pages to print. |
“Exceeded the maximum number of multi-sheet fold (Half Fold).” |
The maximum number of multi-sheet folds (Half Fold) was exceeded. |
For details about the maximum number of multi-sheet folds (Half Fold), see "Fold", Print. |
“Output Tray Changed” |
The output tray was changed because the paper size of the specified output tray is limited. |
Specify the proper output tray. |
“Perfect Binding is not available with the settings.” |
Perfect Binding is not possible under the settings that you have specified. |
Check the current settings. For details about which functions are not available when Perfect Binding is specified, see "Perfect Binding", Print. |
“Perfect Binding is not available with this number of sheets.” |
Perfect Binding is not possible with the number of sheets that you have specified. |
For details about the proper number of sheets, see "Specifications for Perfect Binder", Maintenance and Specifications. |
“Print Overrun” |
Images were discarded while printing. |
Select a lower resolution on the printer driver. For details about how to change the resolution setting, see the printer driver Help. |
“Punch Cancelled” |
Punch printing was canceled. |
Check the paper orientation, print orientation, and then punch position. Certain settings can produce print results that might not be as expected. |
“Ring Binding is not available with the settings.” |
Ring Binding is not possible under the settings that you have specified. |
Check the current settings. For details about which functions are not available when Ring Binding is specified, see "Ring Binding", Print. |
“Staple Cancelled” |
Stapling printing was canceled. |
Check the paper orientation, paper quantity, print orientation, and staple position. Certain settings can produce print results that might not be as expected. |