Previous
You can specify and display the paper tray in which to load designation sheets.
You can also specify the display time and copying method for duplex copying.
Tray to Program
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
Tray 6
Tray 7
Tray 8
Tray A
Intpsr. Upper (when the interposer is installed.)
Intpsr. Lower (when the interposer is installed.)
Default: Off (Tray is not specified.)
Apply Duplex
Yes
No
Default: [Yes]
Display Time
At Mode Selected
Full Time
Default: [At Mode Selected]
When you select an interposer tray, you cannot change the [Display Time] and [Apply Duplex] settings.
When [At Mode Selected] is selected for [Display Time], the [Desig. Sheet 1–11] settings only appear when the designation sheet function is selected.
You can specify the [Apply Duplex] settings only when [At Mode Selected] is selected for [Display Time].
The lock mark (
) is displayed next to the paper tray when [Full Time] is selected for [Display Time].
