You can specify and display the paper tray in which to load separation sheets.
You can also specify the display time.
Tray to Program
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
Tray 6
Tray 7
Tray 8
Tray A
Intpsr. Upper (when the interposer is installed.)
Intpsr. Lower (when the interposer is installed.)
Default: Off (Tray is not specified.)
Display Time
At Mode Selected
Full Time
Default: [At Mode Selected]
When you select an interposer tray, you cannot change the [Display Time] setting.
When [At Mode Selected] is selected for [Display Time], the [Sep. Sheet] settings only appear when the separation sheet function is selected.
The lock mark () is displayed next to the paper tray when [Full Time] is selected for [Display Time].