Skip header
 

Specifying the distance of the cut from the fore edge

Specify the distance of the cut from the fore edge.

1Press [Cut Fore Edge].

Operation panel screen illustration

2Make sure that [Specify Cut Size] is selected.

3Enter the cut length using the number keys, and then press [Sharp].

Operation panel screen illustration

Note

  • You can adjust the position of the fore edge cut from 6.0 to 50.0 mm (0.24 to 1.96 inches) in 0.1 mm (0.01 inches) increments.

  • For details about how to perfect bind, see Perfect Binding.

PreviousNext