Skip header
 

Specifying the fore edge cut

Use the following procedure to specify the fore edge cut when perfect binding is applied.

Illustration of cutting the fore edge

  1. Finishing size

  2. Cut size

  3. 139.7–216.0 mm (5.50–8.50 inches)

  4. 6.0–50.0 mm (0.24–1.96 inches)

There are two ways of specifying the fore edge:

Specify Cut Size

Specify the distance of the cut from the fore edge.

Specify Finishing Size

Specify the size of the finished bound booklets to determine the position where you want to cut the fore edge.

Note

  • When specifying the fore edge cut, be sure that the cut is at least 6 mm (0.24 inches) from the fore edge.

PreviousNext