Previous
Press [Dest.:], and then select the setting items using the [
] or [
] key.
Select [SMB] 
Press [OK]
Select [Manual Entry] Press [OK]
Enter the path for the folder Press [OK]
In the following example path, the shared folder name is "user" and the computer name is "desk01":
\\desk01\user
Depending on the destination setting, enter the user name for logging in to the computer Press [OK]
Depending on the destination setting, enter the password for logging in to the computer Press [OK]
Press [Com.Test]
A connection test is performed to check whether the specified shared folder exists.
If the message "Connection to PC failed. Check the settings." appears, see "Troubleshooting When Using the Scanner Function", Troubleshooting.
Check the connection test result Press [Exit]
Press [OK]
To modify or change an entered folder path, press [EditDest].
The connection test may take time.
You may not be able to press [Com.Test] right after pressing [Cancel] during a connection test.
Even if the connection test was successful, the machine may fail to transfer the file if you do not have write privileges for the file or there is not enough free hard disk space.
If the client computer has a fixed IP address assigned to it, you can specify the IP address manually by including it in the path name of the destination folder. For example, if the IP address is "192.168.1.191" and the shared folder name is "user", enter "\\192.168.1.191\user" as the path.
