Previous
This section gives you various details about and recommendations concerning thick paper.
When loading thick paper of 106–162 g/m2 (28 lb. Bond–90 lb. Index) in the paper trays or bypass tray, follow the recommendations below to prevent misfeeds and loss of image quality.
Jams and misfeeds can occur when printing on thick smooth paper. To prevent such problems, be sure to fan smooth paper thoroughly before loading them. If paper continues to become jammed or feed in together even after they are fanned, load them one by one from the bypass tray.
When loading thick paper, set the paper direction according to its grain, as shown in the following diagram:
Direction of paper grain
Paper trays
Bypass tray
Select [Thick Paper 1] or [Thick Paper 2] as the paper thickness in [Tray Paper Settings].
If [Thick Paper 2] is selected, the print speed may change.
Even if thick paper is loaded as described above, normal operations and print quality might still not be possible, depending on the paper type.
Prints might have prominent vertical creases.
Prints might be noticeably curled. Flatten out prints if they are creased or curled.
When printing onto thick paper, the print speed changes.
