Previous
Paper that has a horizontal length of 60.0–216.0 mm (2.37–8.50 inches) and a vertical length of 127.0–900.0 mm (5.00–35.43 inches) can be fed in from the bypass tray.
Press the [Copy] key, and then select the setting items using the [
] or [
] key.
Load the paper face up in the bypass tray
Press [
]
Select [Paper Size] 
Press [OK]
Select [Custom Size] Press [OK]
Enter the horizontal size with the number keys Press [OK]
Enter the vertical size with the number keys Press [OK]
Press []
Select [Paper Type] Press [OK]
Specify the type of the paper as necessary Press [OK]
Place the originals Press [Start]
When the copy job is finished, press the [Reset] key to clear the settings.
Specify the original size if necessary. For details, see Specifying Original Size When the Bypass Tray is Selected.
When placing originals on the exposure glass, press the [
] key after all the originals have been scanned.
