You can set conditions when using PCL for printing.
Duplex
You can specify whether or not to print on both sides of a sheet. If you specify duplex printing, you must also specify the binding method.
Default: [Off]
Off
Long Edge Bind
Short Edge Bind
Orientation
Select the page orientation.
Default: [Portrait]
Portrait
Landscape
Form Lines
You can specify the number of lines per page from 5 to 128. The default paper size is used when the paper size is not specified in the print data.
Default: 60
Font Source
You can display the location of the default font.
Default: [Resident]
Font Number
You can specify the ID of the default font you want to use.
Default: 0
0 to 63 (Resident)
Point Size
You can specify the point size you want to use for the default font between 4.00 to 999.75 in 0.25 increments. This setting is effective only for a variable-space font.
Default: 12.00 points
Font Pitch
You can specify the number of characters per inch you want to use for the default font between 0.44 to 99.99 in 0.01 increments. This setting is effective only for fixed-space fonts.
Default: 10.00 pitches
Symbol Set
You can specify the character set for the default font.
Default: [PC-8]
Available sets are as follows:
Roman-8, Roman-9, ISO L1, ISO L2, ISO L5, ISO L6, ISO L9, PC-775, PC-8, PC-8 D/N, PC-850, PC-852, PC-858, PC8-TK, PC-1004, Win L1, Win L2, Win L5, Win Baltic, Desktop, PS Text, MS Publ, Math-8, PS Math, Pifont, Legal, ISO 4, ISO 6, ISO 11, ISO 15, ISO 17, ISO 21, ISO 60, ISO 69, Win 3.0, MC Text, UCS-2, PC-864, Arabic-8, Win Arabic, PC-866, PC-866U, ISO Cyrillic, Win Cyrillic, PC-851, Greek-8, ISO Greek, PC-8 Greek, Win Greek, PC-862, Hebrew-7, Hebrew-8, ISO Hebrew
Courier Font
You can select the type of courier font.
Default: [Regular]
Regular
Dark
Ext. A4 Width
You can specify whether or not to extend the width of the printable area of A4 sheets by reducing side margins.
Default: [Off]
On
Off
Append CR to LF
You can specify whether or not to append a CR code to each LF code to print text data clearly.
Default: [Off]
On
Off
Resolution
You can specify the print resolution in dots per inch.
Default: [600dpi]
600dpi
1200dpi
Blank Page Print
You can specify whether or not to print blank pages.
Default: [On]
On
Off