Skip header
 

Specifications for the Printer

Configuration:

Desktop

Print process:

LED alley and electro-photographic printing

First print speed:

  • Region A icon(mainly Europe and Asia)

    4.6 seconds

  • Region B icon (mainly North America)

    4.5 seconds

Print speed:

One-side printing:

  • 40 pages per minute (A4Portrait)

  • 42 pages per minute (81/2 × 11Portrait)*1

*1 40 pages per minute when the bypass tray is used

Two-side printing:

  • 35 pages per miniute(A4)*2

  • 36 pages per miniute(81/2×11)*3

*2 34 pages per minute when the Tray 3 is used

*3 35 pages per minute when the Tray 3 is used

Resolution:

1200 × 1200 dpi

600 × 600 dpi

Paper size:

For details, see Paper Size Specifications.

Paper weight:

For details, see Paper Type Specifications.

Paper output capacity:

Standard 250 sheets (80 g/m2, 20 lb. BOND)

Paper input capacity:

Tray

Paper capacity*1

Standard paper feed tray

500 sheets

Bypass tray

100 sheets

250-sheet paper feed unit

250 sheets

500-sheet paper feed unit

500 sheets

*1 Paper weight: 80 g/m2 (20 lb. BOND)

Power requirements:

  • Region A icon(mainly Europe and Asia)

    220–240 V, 50/60 Hz, 5.3 A

  • Region B icon (mainly North America)

    120–127 V, 60 Hz, 10 A

Power consumption (complete system):

  • Region A icon (mainly Europe and Asia)

    Maximum: 1,110 W

  • Region B icon (mainly North America)

    Maximum: 1,150 W

The complete system consists of the main unit and the two optional paper feed units.

The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less

Warm-up time (23 °C (73.4 °F), rated voltage):

17 seconds

Dimensions:


Width

Depth

Height

Printer only

(tray not extended)

370 mm

(14.6 inches)

392 mm

(15.5 inches)

SP 4510DN:

306 mm

(12.1 inches)

SP 4520DN:

427 mm

(16.9 inches)

With Hard Disk

384.5 mm

(15.2 inches)

392 mm

(15.5 inches)

SP 4510DN:

306 mm

(12.1 inches)

SP 4520DN:

427 mm

(16.9 inches)

Weight:

15.5 kg (34.2 lb.)

Noise emission:

  • Sound power level:

    • Main unit only

      Stand-by

      31.0 dB (A)

      Printing

      68.4 dB (A)

    • Complete system

      Stand-by

      31.9 dB (A)

      Printing

      71.5 dB (A)

  • Sound pressure level:

    • Main unit only

      Stand-by

      20.0 dB (A)

      Printing

      60.5 dB (A)

    • Complete system

      Stand-by

      19.9 dB (A)

      Printing

      64.9 dB (A)

      • Sound power levels and sound pressure levels are actual values measured in accordance with ISO 7779.

      • Sound pressure levels are measured from the position of the bystander.

      • The complete system consists of the main unit and the two optional paper feed units.

Memory:

Standard 512 MB, up to 1 GB (with the optional SDRAM module)

Hard disk:

250 GB (Optional)

Interfaces:

Standard:

  • Gigabit Ethernet (10BASE-T/100BASE-TX/1000BASE-T)

  • USB 2.0

    To use USB 2.0, a USB computer port and cable that support USB 2.0 are required.

  • USB Host

  • SD card slot

Optional:

  • IEEE 802.11a/b/g/n (Wireless LAN)

  • Parallel (Bidirectional IEEE 1284)

Printer Language:

PCL5e/6, PostScript 3, PDF, XPS (optional)

Fonts:

PCL 5e/PCL 6:

45 fonts, 13 International fonts

PostScript 3, PDF:

136 fonts

Network:

Topology: The physical or logical layout of the nodes (devices) in a network (10BASE-T/100BASETX/1000BASE-T)

Protocol: TCP/IP (IPv4, IPv6), IPX/SPX