Top Page > Operating Instructions > Loading Paper > Paper Size Specifications

Paper Size Specifications

The following tables show the paper sizes that can be loaded in each paper tray. The "Paper size" column shows the names of paper sizes and their dimensions in millimeters and inches. The and icons indicate the paper orientation in relation to the printer body.

The letters in the tables indicate the following:

A: Select the paper size using the control panel.
B: Select the paper size using the paper size dial on the tray.
C: Set the paper size dial on the tray to "", and select the paper size with the control panel.
: You can print on both sides of paper.
-: Not supported

Metric sizes
Paper size name	Actual size	Two-sided	Bypass tray	Tray 1	Trays 2, 3
A4	210 × 297 mm		A	B	B
A5 ^*	148 × 210 mm		A	B	B
A5	148 × 210 mm		A	C	C
A6	105 × 148 mm		A	B	B
B5	182 × 257 mm		A	C	C
B6	128 × 182 mm		A	C	C
B6	128 × 182 mm	-	A	-	-
C5 Env	162 × 229 mm	-	A	C	-
C6 Env	114 × 162 mm	-	A	C	-
DL Env	110 × 220 mm	-	A	C	-
16K	195 × 267 mm		A	C	C

* While a print job is performed on paper that is loaded vertically, smearing may occur near the edges of the printed paper. If this happens, set the paper horizontally and print again.

Imperial sizes
Paper size name	Actual size	Two-sided	Bypass tray	Tray 1	Trays 2, 3
8¹/₂ × 14	8.5" × 14"		A	B	B
8¹/₂ × 13	8.5" × 13"		A	C	C
8¹/₂ × 11	8.5" × 11"		A	B	B
8¹/₄ × 14	8.25" × 14"		A	C	C
8¹/₄ × 13	8.25" × 13"		A	C	C
8 × 13	8" × 13"		A	C	C
8 × 10¹/₂	8" × 10.5"		A	C	C
8 × 10	8" × 10"		A	C	C
7¹/₄ × 10¹/₂	7.25" × 10.5"		A	C	C
5¹/₂ × 8¹/₂ ^*	5.5" × 8.5"		A	B	B
5¹/₂ × 8¹/₂	5.5" × 8.5"	-	A	-	-
4¹/₈ × 9¹/₂	4.125" × 9.5"	-	A	C	-
3⁷/₈ × 7¹/₂	3.875" × 7.5"	-	A	C	-

* While a print job is performed on paper that is loaded vertically, smearing may occur near the edges of the printed paper. If this happens, set the paper horizontally and print again. Use the bypass tray when printing on paper that is set horizontally.

Custom Size Specifications

You can also load custom size paper by specifying horizontal and vertical sizes.

The following tables show the custom paper sizes that can be loaded in each tray.

Metric sizes
Tray	Horizontal size (One-sided)	Vertical size (One-sided)	Horizontal size (Two-sided)	Vertical size (Two-sided)
Bypass tray	60.0 to 216.0 mm	127.0 to 900.0 mm	100.0 to 216.0 mm	148.0 to 356.0 mm
Trays 1–3	100.0 to 216.0 mm	148.0 to 356.0 mm	100.0 to 216.0 mm	279.0 to 356.0 mm

Imperial sizes
Tray	Horizontal size (One-sided)	Vertical size (One-sided)	Horizontal size (Two-sided)	Vertical size (Two-sided)
Bypass tray	2.37 to 8.50"	5.00 to 35.43"	3.94 to 8.50"	5.83 to 14.01"
Trays 1–3	3.94 to 8.50"	5.83 to 14.01"	3.94 to 8.50"	10.99 to 14.01"