Previous
Adjust Image Density
Adjusting the print image density can prevent faint spots or smears appearing on printed pages. You can specify a density value between -6 and 3.
Only change this setting from its default value if necessary. For details, see Adjusting Image Density.
Adjust Print Position
You can adjust the starting position of the printing page. For details, see Adjusting Printing Position.
Print Test Sheet
You can print the registration test sheet.
Only the installed trays appear on the display panel.
Paper Trays 1–3
Bypass Tray
Duplex Unit
Adjust Position
You can specify the start position for printing on a page.
Only the installed trays appear on the display panel.
Horizontal: Trays 1-3
Horizontal: Bypass Tray
Horizontal: Back Side
Vertical: Trays 1–3
Vertical: Bypass Tray
Vertical: Back Side
